Re: IE Workbook and OSPFv3

From: CCIEin2006 (ciscocciein2006@gmail.com)
Date: Tue Dec 20 2005 - 15:46:52 GMT-3


Oh cool, but won't I lose the image after a reboot?

On 12/20/05, Bill.McKenzie@bisys.com <Bill.McKenzie@bisys.com> wrote:
>
> the -r parameter in the tftpdnld command only puts it in main memory and
> doesn't write it to flash.
>
> Bill
>
> "Exceeding Client Expectations"
>
>
>
> CCIEin2006
> <ciscocciein2006@
> gmail.com> To
> Sent by: Brian McGahan
> nobody@groupstudy <bmcgahan@internetworkexpert.com>
> .com cc
> lab <ccielab@groupstudy.com>
> Subject
> 12/20/2005 01:38 Re: IE Workbook and OSPFv3
> PM
>
>
> Please respond to
> CCIEin2006
> <ciscocciein2006@
> gmail.com>
>
>
>
>
>
>
> Yeah but the file is 17.4 meg and I only have 16 meg flash. How will it
> fit?
>
> On 12/19/05, Brian McGahan <bmcgahan@internetworkexpert.com> wrote:
> >
> > You can boot the 2600XM 12.2T Enterprise Plus image to the 2620s
> > via the "tftpdlnd -r" command in rommon. This will allow them to
> > support OSPFv3.
> >
> >
> > HTH,
> >
> > Brian McGahan, CCIE #8593
> > bmcgahan@internetworkexpert.com
> >
> > Internetwork Expert, Inc.
> > http://www.InternetworkExpert.com
> > Toll Free: 877-224-8987 x 705
> > Outside US: 775-826-4344 x 705
> > 24/7 Support: http://forum.internetworkexpert.com
> > Live Chat: http://www.internetworkexpert.com/chat/
> >
> >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> > Of
> > > CCIEin2006
> > > Sent: Saturday, December 17, 2005 5:09 PM
> > > To: lab
> > > Subject: IE Workbook and OSPFv3
> > >
> > > Hello group,
> > >
> > > In the Version 3 workbook, do all routers need to support OSPFv3?
> > Which
> > > labs
> > > require it?
> > > I am asking because most of my routers are 2620's with 64meg ram and
> > 16meg
> > > flash so the latest code I can load is 12.2(15)T Enterprise Basic.
> > > Unfortunately only IP plus version of 12.2(15)T supports OSPFv3 and
> > that
> > > requires 32 meg ram.
> > >
> > > I do, however, have 3 2600XM routers which do support OSPFv3 will I be
> > > able
> > > to make due with those?
> > >
> > > Thanks!
> > >
> > >
> > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> ============================================
> STATEMENT OF CONFIDENTIALITY
>
> The information contained in this electronic message and any attachments
> to
> this message are intended for the exclusive use of the addressee(s) and
> may
> contain confidential or privileged information. No representation is made
> on its accuracy or completeness of the information contained in this
> electronic message. Certain assumptions may have been made in the
> preparation of this material as of this date, and are subject to change
> without notice. If you are not the intended recipient, you are hereby
> notified that any dissemination, distribution or copying of this e-mail
> and
> any attachment(s) is strictly prohibited.
>
> Please reply to the sender and destroy all copies of this message and any
> attachments from your system.



This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:51 GMT-3