From: Faryar Zabihi \(fzabihi\) (fzabihi@cisco.com)
Date: Sat Dec 17 2005 - 11:07:09 GMT-3
From: Faryar Zabihi (fzabihi)
Sent: Friday, December 16, 2005 2:37 PM
To: ccielab@groupstudy.com
Subject: V3.0 Lab1 Requirement 3.3
I wanted to know if the solution guide is wrong on Lab1 section 3.3
I have
redistribute connected subnets route-map Vlan6OSPF
but the solution guide has
redistribute connected route-map Vlan6OSPF
Doing the solution guide does not work. I do not know of any other way
to advertise vlan 6 without using the subnets word in the redistribute
command.
The route shows up on R4 as such
O E2 183.1.6.0 [110/20] via 183.1.46.6, 00:54:28, Ethernet1/0
Am I doing this right?
Faryar Zabihi
Systems Engineer
Direct: 919-574-0133
Mobile: 713-859-8674
fzabihi@cisco.com <mailto:fzabihi@cisco.com>
Cisco Systems Inc.
RTP, NC 27709
For urgent network matters, please call the Cisco Technical Assistance
Center (TAC) at 1-800-553-2447
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:51 GMT-3