From: KSGoh (kianseng.goh@gmail.com)
Date: Sat Dec 17 2005 - 10:00:31 GMT-3
thanks for helping..
do u use doit using all your 7 routers ?
----- Original Message -----
From: <RIDNEY_M_LAUDIANO.TTSP@ts.tsuneishi.co.jp>
To: "KSGoh" <kianseng.goh@gmail.com>; "Cisco certification"
<ccielab@groupstudy.com>
Sent: Saturday, December 17, 2005 8:29 AM
Subject: Re: LAB WB!!
>
> hi KSGoh,
>
> I have the same problem with you, I also have 7 x 25xx routers and nothing
> more.
>
> You can try to look at the DOiT sample lab from NMC, they are using 7
> routers for their lab (including bb router) maybe it would do you fine.
> But if you do not have the 2 x 3550s, then you need to additional 2
> routers to replace them and do router-on-a-stick.
>
> regards,
>
> ridney
>
>
>
> KSGoh <kianseng.goh@gmail.com> wrote on 12/15/2005 11:23:52 PM:
>
> ) [image removed]
> ) i'm looking for a suitable lab workbook to be used for my lab..
>
> ) as a poor student, i only manage to get a total of 7 x 2500 routers from
> ebay,
> ) and i did a search from internet, surprising knowing that most workbook
> did
> ) not written to be run from 2500 routers....
>
> ) i think i should NOT be the only one who did use 2500 in the home lab..
>
> ) will there be any different if i replaced those 38xx or 26xx router will
> 2500
> ) ?
> ) will i get different result? or how should i changed or is there any
> workbook
> ) which are written to be run from 2500 routers?
>
> ) _______________________________________________________________________
> ) Subscription information may be found at:
> ) http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:51 GMT-3