From: Joshua Li (joshualixin@gmail.com)
Date: Fri Dec 16 2005 - 04:07:58 GMT-3
Actually, i do not want save the config into Startup-config. I want to save
is as my own. The lab is for my department to use. So, i need to "copy flash
run" when i use it.
Thanks
On 12/16/05, Marc Russell <mrussell@ccbootcamp.com> wrote:
>
> Type "write mem"
>
> Marc Russell
> Network Learning, Inc. (A Cisco Learning Partner)
> www.ccbootcamp.com (CCIE Training)
> (Cisco Hardware Practice Labs Kits)
> http://www.ccbootcamp.com/hardware.asp
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Joshua Li
> Sent: Friday, December 16, 2005 5:16 AM
> To: ccielab@groupstudy.com
> Subject: copy run flash in 2501 router falied [bcc][faked-from]
> Importance: Low
>
> Hi,
>
> I am trying to save my configuration file into NVRAM in a Cisco 2501
> router.
> But i get failed.
>
> r1>sh ver
> Cisco Internetwork Operating System Software
> IOS (tm) 2500 Software (C2500-IS-L), Version 12.3(16)
> ...
>
> 16384K bytes of processor board System flash (Read ONLY)
> ..
>
> r1#dir
> Directory of flash:/
>
> 1 -rw- 16228680 <no date> /c2500-
> is-l.123-16.bin
>
> 16777212 bytes total (548468 bytes free)
>
> r1#copy run flash
> **** NOTICE ****
> Flash load helper v1.0
> This process will accept the copy options and then terminate
> the current system image to use the ROM based image for the copy.
> Routing functionality will not be available during that time.
> If you are logged in via telnet, this connection will terminate.
> Users with console access can see the results of the copy operation.
> ---- ******** ----
> Proceed? [confirm]
> Destination filename [r1-confg]? xin
> Erase flash: before copying? [confirm]n
> *Mar 1 08:15:07.169: %SYS-5-RELOAD: Reload requested
> %FLH: /running-config from 255.255.255.255 to flash ...
>
> System flash directory:
> File Length Name/status
> 1 16228680 /c2500-is-l.123-16.bin
> [16228744 bytes used, 548472 available, 16777216 total]
> Accessing file '/running-config' on 255.255.255.255... [failed]
>
> %FLH: retry #1
> %FLH: /running-config from 255.255.255.255 to flash ... (retry)
>
> Any suggestions?
>
> Thanks,
>
> Joshua
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:51 GMT-3