From: Christian Sica (csica@liweb.net)
Date: Thu Dec 15 2005 - 00:01:21 GMT-3
Hi Nadeem,
I too came across this problem. IE also has a posting on their forum for
this lab as well. The problem I believe you are having is the physical
hardware you are using does not support GTS. This is only an issue on the
2600 & 3600 series routers. If you had a 7200 or some other router with
ATM, this config should work just fine. Here is some info from Cisco:
http://www.cisco.com/warp/public/121/traffic_shape_3600.shtml#first
HTH,
Christian
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Nadeem Zahid (iszahid)
Sent: Tuesday, December 13, 2005 11:52 PM
To: ccielab@groupstudy.com
Subject: 8.1-8.3 Lab 9
Anyone else having same issue for lab9 QoS part:
policy-map QOS
class class-default
shape average 5000000 160000 80000
!
interface ATM1/0
ip address 54.1.1.6 255.255.255.0
no atm ilmi-keepalive
pvc 0/102
protocol ip 54.1.1.254 broadcast
encapsulation aal5snap
When I apply the GTS, I get this message:
Rack02R6(config-if)#service-policy output QOS
GTS : Not supported on this interface
I'm running 12.2(15)T16.
Nadeem
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:51 GMT-3