From: Godswill Oletu (oletu@inbox.lv)
Date: Wed Dec 14 2005 - 22:34:12 GMT-3
couple of questions:
1. which router joined the group 225.5.5.5?
2. Are you running Auto-RP or static RP?
3. If Auto-RP, which Router is your MA?
4 If static-RP, hope it is configured on all Routers?
4. If Auto-RP, did you enable nbma-mode on R1?
5. If Auto-RP, did youu enable Auto-RP listener?
Answer to these questions, will give one a better understanding of your
scenario.
HTH
Godswill Oletu
----- Original Message -----
From: "Chris" <chris_atkins@Blueyonder.co.uk>
To: <ccielab@groupstudy.com>
Sent: Wednesday, December 14, 2005 6:19 PM
Subject: Pim Issue
> R4----------------------R3
> |
> |
> |
> R1------------- R2
>
> Hi
> I hope someone can help me with this as pulling hair out.
>
> R1is hub and R2 and R3 are spokes NBMA multipoint.
>
> R4 to R3 is serial HDLC.
>
> Running pim sparse RP is R1.
>
> Can ping fine, however pings( multicast group 225.5.5.5) from R4 time out
> aftrer approx 90 - 100 pings. A bit lost what going on (If restart ping
> still
> fails.), any help most apprciated in advance.
>
> Cheers
>
> Chris
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:51 GMT-3