From: Schulz, Dave (DSchulz@dpsciences.com)
Date: Wed Dec 14 2005 - 22:32:17 GMT-3
Can you send over your configs, Chris? Are you running Auto-RP, BSR, etc. It
is interesting that the ping would start and then stop.
Dave
-----Original Message-----
From: nobody@groupstudy.com
To: ccielab@groupstudy.com
Sent: 12/14/2005 6:19 PM
Subject: Pim Issue
R4----------------------R3
|
|
|
R1------------- R2
Hi
I hope someone can help me with this as pulling hair out.
R1is hub and R2 and R3 are spokes NBMA multipoint.
R4 to R3 is serial HDLC.
Running pim sparse RP is R1.
Can ping fine, however pings( multicast group 225.5.5.5) from R4 time
out
aftrer approx 90 - 100 pings. A bit lost what going on (If restart ping
still
fails.), any help most apprciated in advance.
Cheers
Chris
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:51 GMT-3