From: Schulz, Dave (DSchulz@dpsciences.com)
Date: Fri Dec 09 2005 - 18:26:58 GMT-3
Kim -
If you have various addresses in the same area (meaning to include
them)....I would use option #1. However, if you know that the single
address should be included into that area only, then the second is best
(only for the reason of keeping things simple). However, both work
fine. I don't believe that there is any "this is the way you SHOULD do
it" type of thing, but maybe others have some ideas here.
Dave Schulz,
Email: dschulz@dpsciences.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Kim Judy
Sent: Friday, December 09, 2005 4:15 PM
To: ccielab@groupstudy.com
Subject: Wildcard issue
hi group,
I have a query that if a interface has an Ip address 172.16.12.1/25
What wild card bits should I use under the IGP process ?
router ospf 1
net 172.16.12.1 0.0.0.127 or
net 172.16.12.1 0.0.0.0
which is the best way ? What does Cisco expect from us ?
If not specified should I use a "router-id" under each IGP running on a
router ?
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:50 GMT-3