From: Mike Flanagan (mikenoc@mindspring.com)
Date: Wed Dec 07 2005 - 21:46:15 GMT-3
If I just wanted to match all traffic using CBWFQ could I do the
following withought using a class-map ? Could I use this below
command to match all traffic coming in on this switch port ? What if
I wanted to match all traffic in a given VLAN. Would the best way be
to add this under the SVI interface or maybe just add the same policy
map to each port in the VLAN ?
Thanks in advance,
Mike F.
policy-map CBWFQ
class class-default
set my value here
int gig1/0/1
service-policy input CBWFQ
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:50 GMT-3