From: Gustavo Novais (gustavo.novais@novabase.pt)
Date: Wed Dec 07 2005 - 14:27:16 GMT-3
Some time ago there was a post on that subject, answered by Chris Lewis,
and unfortunately you cannot change through an access-list the specific
distance of an external route on EIGRP. But you can change its metric.
HTH
Gustavo
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Le Anh Duong
Sent: quarta-feira, 7 de Dezembro de 2005 17:01
To: Cisco certification
Subject: Admin Distance of External EIRGP route
Hi group,
Is it possible to change the Administrative Distance (AD) of a specific
EIGRP
external route ?
Take the following for example:
R1f0/0---------f0/0 R2----loop1
|
loop2
R1 and R2 run EIGRP on ethernet segment, R2 redistribute loop1 and loop2
into
EIGRP. R1 wants to change the AD of route to loop1 to 190 and keep the
AD of
root to loop2 (AD=170).
The "distance 190 IP_add_of_R2_f0/0 Access-list" does not help. This
command
only can change AD of internal EIGRP routes.
The "distance eirgp 90 190" changes AD of all external EIRGP routes.
Can anyone help ?
TIA
le
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:50 GMT-3