From: Bob Sinclair (bsinclair@netmasterclass.net)
Date: Wed Dec 07 2005 - 14:23:50 GMT-3
Le,
It is always risky to claim that the IOS CANNOT do something, without knowing
the source code, but, that said, there is no way I am aware of to change the
AD for particular external EIGRP prefixes. This question has come up before on
the list, and others have come to the same conclusion. If the task allows,
change the AD for all external prefixes with the "distance eigrp" command.
HTH,
Bob Sinclair
CCIE #10427, CCSI 30427
www.netmasterclass.net
----- Original Message -----
From: Le Anh Duong
To: Cisco certification
Sent: Wednesday, December 07, 2005 12:01 PM
Subject: Admin Distance of External EIRGP route
Hi group,
Is it possible to change the Administrative Distance (AD) of a specific
EIGRP
external route ?
Take the following for example:
R1f0/0---------f0/0 R2----loop1
|
loop2
R1 and R2 run EIGRP on ethernet segment, R2 redistribute loop1 and loop2
into
EIGRP. R1 wants to change the AD of route to loop1 to 190 and keep the AD
of
root to loop2 (AD=170).
The "distance 190 IP_add_of_R2_f0/0 Access-list" does not help. This
command
only can change AD of internal EIGRP routes.
The "distance eirgp 90 190" changes AD of all external EIRGP routes.
Can anyone help ?
TIA
le
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:50 GMT-3