From: Scott Morris (swm@emanon.com)
Date: Fri Dec 02 2005 - 15:09:19 GMT-3
Well... Each router needs to know how to route... So everyone who touches
the packet needs SOME way to go with it. Either static route, or some
dynamic routing protocol would be necessary.
Don't forget routing works both ways. So while you may go out just fine,
you also need to come back!
"debug ip packet" can help see what is going on and where things go or don't
go.
Cheers,
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Des
Sent: Friday, December 02, 2005 12:57 PM
To: ccielab@groupstudy.com
Subject: iBGP
Hi there,
I have the following scenerios.
R1(AS100)------R2(non-bgp)-----R3(AS100)
I am peering with R3 with ibgp. I can receive all the routes from R1.
But however, I cannot ping R1 advertised networks. I need to have a static
route at R2 for those network advertised by R1. Is there any way without
adding static routes?
Tks!
Des
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:50 GMT-3