From: Anthony Sequeira (terry.francona@gmail.com)
Date: Thu Dec 01 2005 - 01:40:25 GMT-3
This worked for me on a 3600 series running 12.2
username test password cisco
username test priv 5
privilege exec level 5 ping
privilege exec level 5 undebug all
privilege exec level 5 configure terminal
privilege configure level 5 interface
privilege interface level 5 ip address
line vty 0 4
login local
On 11/30/05, jnkmail4eva@yahoo.com <jnkmail4eva@yahoo.com> wrote:
>
> I am having some difficulty configuring the following :
> user test should be able to execute the following commands
> 1) ping
> 2) turn off debugging
> 3) change an ip address of an interface
>
> !
> username test passsword cisco
> username test priv level 5
> privillege exec level 5 ping
> privillege exec level 5 undebug all
> line vty 0 4
> login local
> !
>
> I am able to configure the router in my lab to satisfy conditions 1 and 2
> but I can't figure out how to configure part 3.
>
> I have looked on Cisco's website but nothing conrete ..
> Any guidance is greatly appreciated
>
> Thnx
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:49 GMT-3