From: Mike Flanagan (mikenoc@mindspring.com)
Date: Mon Nov 28 2005 - 06:03:43 GMT-3
Hello,
Looking at the example for anycast RP on the RP routers you do not
specify the ip pim rp-address command. So from what this is saying on
the RP's you just run MSDP between them and do not specify any RP
with the ip pim rp-address command. Also I am getting an %PIM-6-
INVALID_RP_JOIN message on routers that seem to be denying joins from
my catalyst switches ? I found a link on this and it asked to check
for filtering and I do not have any filtering configured.
Thanks,
Mike F.
*Mar 3 00:23:04.067: %PIM-6-INVALID_RP_JOIN: Received (*,
224.0.1.40) Join from 112.1.12.8 for invalid RP 192.168.1.1
R5# sh clock
http://www.cisco.com/univercd/cc/td/doc/cisintwk/intsolns/mcst_sol/
anycast.htm
http://www.cisco.com/warp/public/105/mcastguide0.html <--- For error
I am getting
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:08 GMT-3