RE: wrr-queue command on 3750

From: Primetek_Easyman (easyman@primetek.com.tw)
Date: Mon Nov 28 2005 - 05:26:42 GMT-3

• Next message: Mike Flanagan: "Configuring Anycast RP"
• Previous message: Mike Flanagan: "wrr-queue command on 3750"
• Maybe in reply to: Mike Flanagan: "wrr-queue command on 3750"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

The idea behind 3750 is slightly different from 3550.

There is no "wrr" command in 3750, instead it has "srr" or "qset" command.
Check this url
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750/12225sed/scg/swq
os.htm#wp1203619

HTH.
Regards,
Lin
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Mike
Flanagan
Sent: Monday, November 28, 2005 4:01 PM
To: Cisco certification
Subject: wrr-queue command on 3750

   I am trying to practice Auto QOS on a 3750 and I am not seeing the
option for specifying anything for wrr. Is this feature not supported
for the 3750 ?

    Thanks,

      Mike F.

SW2#conf t
Enter configuration commands, one per line. End with CNTL/Z.
SW2(config)#mls qos
SW2(config)#int gig1/0/11
SW2(config-if)#wrr?
% Unrecognized command
SW2(config-if)#wrr

• Next message: Mike Flanagan: "Configuring Anycast RP"
• Previous message: Mike Flanagan: "wrr-queue command on 3750"
• Maybe in reply to: Mike Flanagan: "wrr-queue command on 3750"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:08 GMT-3