From: Edwards, Andrew M (andrew.m.edwards@boeing.com)
Date: Tue Nov 22 2005 - 15:20:51 GMT-3
Set metric 0. Make sure it's a type-2 route.
andy
-----Original Message-----
From: sameer.azam@gmail.com [mailto:sameer.azam@gmail.com]
Sent: Monday, November 21, 2005 10:34 PM
To: ccielab@groupstudy.com
Subject: QoS
If we are redistributing between the eigrp and the OSPF, while
redistributing the EIGRP routes in the OSPF how can we set the METRIC
value to (0), means in the routing table of OSPF router the route should
appear as follows;
E2 192.168.2.0 [110/0] via 2.2.2.2
Regards
Sameer
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:07 GMT-3