From: Leigh Harrison (ccileigh@gmail.com)
Date: Wed Nov 16 2005 - 07:15:15 GMT-3
If you're not using default information originate, then the only onter
way to do it is by some trickery with areas.
try:-
internet -- area 1 -- r1 -- area 0 -- r2
on r1 send area 0 (and whoever else) an area range of area 1 being all 0's
Job done.
LH
Dong Lin wrote:
> Hi, it is a lab situation. Just want to know whether I can propagate a
> default to other ospf peers without using default information
>
> Thanks
> ----- Original Message ----- From: "Leigh Harrison" <ccileigh@gmail.com>
> To: "Dong Lin" <dlin22@comcast.net>
> Cc: <ccielab@groupstudy.com>
> Sent: Tuesday, November 15, 2005 12:25 PM
> Subject: Re: OSPF does not redistribute statuc default rotue ?
>
>
>> Hey there,
>>
>> If you don't want to use default information originate, then it
>> depends where you are trying to send the default route.
>>
>> If it's into another ospf area, then try making it a totally stubby
>> area, or send it an area range.
>>
>> LH
>>
>> Dong Lin wrote:
>>
>>> Is there a way to let OSPF to redistribute a static default route ?
>>>
>>> _______________________________________________________________________
>>> Subscription information may be found at:
>>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:07 GMT-3