RE: IEWB V2 Lab6 5.29 - 5.30

From: De Witt, Duane (duane.dewitt@siemens.com)
Date: Mon Nov 14 2005 - 17:35:41 GMT-3

Next message: John Matus: "Re: IE Workbook"
Previous message: Brian McGahan: "RE: IEWB V2 Lab6 5.29 - 5.30"
Maybe in reply to: De Witt, Duane: "IEWB V2 Lab6 5.29 - 5.30"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Thanks, I read that document but obviously not well enough :)

So for the record the correct solution (at least on my own lab) to the
task is:

R2:
address-family ipv4
maximum-paths ibgp 2
bgp dmzlink-bw

R4:
address-family ipv4
neighbor 145.1.47.7 dmzlink-bw
neighbor 145.1.245.2 send-community both
bgp dmzlink-bw

R5:
address-family ipv4
neighbor 145.1.35.3 dmzlink-bw
neighbor 145.1.245.2 send-community both
bgp dmzlink-bw

-----Original Message-----
From: Christian Sica [mailto:csica@liweb.net]
Sent: 14 November 2005 10:11 PM
To: De Witt, Duane; ccielab@groupstudy.com
Subject: RE: IEWB V2 Lab6 5.29 - 5.30

Hi Duane,

According to Cisco's documentation on the DMZLink-BW feature, you need
to
configure BGP using the address family format.

From Cisco:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft
/122
t/122t2/ftbgplb.htm#wp1058858

Example:
Router(config-router)# address-family ipv4
Places the router in address family configuration mode.

.The BGP Link Bandwidth feature is supported only under the IPv4 and
VPNv4
address families.

HTH,

Christian

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
De
Witt, Duane
Sent: Monday, November 14, 2005 2:33 PM
To: ccielab@groupstudy.com
Subject: IEWB V2 Lab6 5.29 - 5.30

Hi Group

Damn, this lab is really challenging me.

This section requires bgp dmzlink-bw and maximum-paths ibgp 2 to be
configured.

So the problem I found was that the EBGP connections upstream had to
have the neighbor x.x.x.x dmzlink-bw statement. The solution doesn't
have this and when I do a show run the config doesn't show this command.
However it only works once I have actually typed it in. If I get
everything working and then reload I no longer have the bandwidth
attributes for each path.

Any ideas? I know it is common practice for the proctor to reload the
lab before scoring and the commands don't even show up on the
configuration?

Maybe someone from IE can shed some light on this lab, I am really
having a hard time understanding some of this stuff.

Regards

Duane

____________________________________________
SIEMENS Siemens Business Services
Siemens Service Center

126 14th Road

Erand Gardens

Midrand

South Africa

* +27 11 5452555
* +27 83 4452768
* +27 11 5415219
* duane.dewitt@siemens.com <mailto:duane.dewitt@siemens.com>

Next message: John Matus: "Re: IE Workbook"
Previous message: Brian McGahan: "RE: IEWB V2 Lab6 5.29 - 5.30"
Maybe in reply to: De Witt, Duane: "IEWB V2 Lab6 5.29 - 5.30"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:06 GMT-3