From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Mon Nov 14 2005 - 17:31:42 GMT-3
> So the problem I found was that the EBGP connections upstream had to
> have the neighbor x.x.x.x dmzlink-bw statement. The solution doesn't
> have this and when I do a show run the config doesn't show this
command.
> However it only works once I have actually typed it in. If I get
> everything working and then reload I no longer have the bandwidth
> attributes for each path.
If that is the case it's probably a bug. When writing it I remember
that my results were inconsistent between platforms.
> Any ideas? I know it is common practice for the proctor to reload the
> lab before scoring and the commands don't even show up on the
> configuration?
AFAIK your rack is not reloaded before they capture your configs.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of De
> Witt, Duane
> Sent: Monday, November 14, 2005 1:33 PM
> To: ccielab@groupstudy.com
> Subject: IEWB V2 Lab6 5.29 - 5.30
>
> Hi Group
>
>
>
> Damn, this lab is really challenging me.
>
>
>
> This section requires bgp dmzlink-bw and maximum-paths ibgp 2 to be
> configured.
>
>
>
> So the problem I found was that the EBGP connections upstream had to
> have the neighbor x.x.x.x dmzlink-bw statement. The solution doesn't
> have this and when I do a show run the config doesn't show this
command.
> However it only works once I have actually typed it in. If I get
> everything working and then reload I no longer have the bandwidth
> attributes for each path.
>
>
>
> Any ideas? I know it is common practice for the proctor to reload the
> lab before scoring and the commands don't even show up on the
> configuration?
>
>
>
> Maybe someone from IE can shed some light on this lab, I am really
> having a hard time understanding some of this stuff.
>
>
>
>
>
> Regards
>
> Duane
>
>
>
> ____________________________________________
> SIEMENS Siemens Business Services
> Siemens Service Center
>
> 126 14th Road
>
> Erand Gardens
>
> Midrand
>
> South Africa
>
>
>
> * +27 11 5452555
> * +27 83 4452768
> * +27 11 5415219
> * duane.dewitt@siemens.com <mailto:duane.dewitt@siemens.com>
>
>
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:06 GMT-3