From: Montiean (noktes@bellsouth.net)
Date: Sat Nov 12 2005 - 13:09:25 GMT-3
Lab4 task doesnot specific using server or client mode. So my personally
idea is that we can use either server mode on both site or one as a client.
However, from my experience many time while I was working in lab workbook,
while using server mode on both sites. Sometime, after I created vlan on one
site but it wasn't propagate through trunk to another site. So I had to
clear vlan database or reload sw to fix the problem. I am not sure someone
will have the same experience. So most of the time if it doesnot have
wording for that.. I will use one as a server and one as a client.
-Montiean
----- Original Message -----
From: "Saad Elias" <selias@uaeu.ac.ae>
To: "Montiean" <noktes@bellsouth.net>
Sent: Saturday, November 12, 2005 10:55 PM
Subject: Re: Lab 2 task 1.1-1.4 VTP server and client mode
> Sorry I meant Lab4 IEWB
>
> Montiean wrote:
>
>> Assume I understand your question and if you mean lab2 in IE, , The
>> question is really explicitly says sw2 should not be able to create or
>> modify any vlan parameters but sw1 is able to. So what do you think how
>> 's different between these two modes?
>>
>> -- Montiean
>>
>> ----- Original Message ----- From: "Saad Elias" <selias@uaeu.ac.ae>
>> To: <ccielab@groupstudy.com>
>> Sent: Saturday, November 12, 2005 9:47 PM
>> Subject: Lab 2 task 1.1-1.4 VTP server and client mode
>>
>>
>>> By deafult VTP mode is server.
>>> In Task 1.1-1.4 , both SW1 and SW2, can't we have more than two server
>>> in VTP ?Why have not he configured one of these switches as server mode
>>> (we do not need to configure), and SW2 client mode.?
>>>
>>> _______________________________________________________________________
>>> Subscription information may be found at:
>>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:06 GMT-3