From: kevin gannon (kevin@gannons.net)
Date: Thu Nov 10 2005 - 18:40:32 GMT-3
Did you manage to get the ping working the only
way I could managed was to move the RP to
the hub. I see the RP getting the register from
the other spoke however the hub nevers sees
the join on the way to the other hub !.
Regards
Kevin
On 11/10/05, Schulz, Dave <DSchulz@dpsciences.com> wrote:
> Wang -
>
> You are exactly correct! It happens as you stated. Thanks !
>
>
> Dave Schulz,
> Email: dschulz@dpsciences.com
>
>
>
> -----Original Message-----
> From: Wang Dehong-DWANG1 [mailto:Dehong.Wang@motorola.com]
> Sent: Thursday, November 10, 2005 3:21 PM
> To: kevin gannon; Schulz, Dave
> Cc: Imal kalutotage; Cisco certification
> Subject: RE: Sparse-dense mode example on frame - AutoRP
>
>
> Only the routers with interested receivers on its directly connected
> subnet or with a forced join interface(ip igmp join/static) shows the
> joined group. In this case, only R6 will show the joined group.
>
> My understanding is that you have to use the spare-mode on all the pim
> interfaces, ip pim auto-rp listerner and ip pim nbma-mode in order to
> ping the group from RP if RP is on the spoke.
>
> - Dehong
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> kevin gannon
> Sent: Thursday, November 10, 2005 2:00 PM
> To: Schulz, Dave
> Cc: Imal kalutotage; Cisco certification
> Subject: Re: Sparse-dense mode example on frame - AutoRP
>
> I will recreate it in my lab and get back to you.
>
> Regards
> Kevin
>
> On 11/10/05, Schulz, Dave <DSchulz@dpsciences.com> wrote:
> > Yes, the route is there. Here is something that I may be confused
> > with, and, maybe I am thinking that this is not working....when really
>
> > everything is fine......
> >
> > I do a show ip igmp group...and only show the joined group at the
> > router that actually joined the group. Maybe I am confused, but I
> > thought that this would show up in ALL routers participating in PIM.
> > That must have been a misconception on my part. I go to the R5 router
>
> > (the RP) and I can see both the shared and source paths for this
> > group. However, I can ping the group from the hub, but not the RP.
> > Should this be the expected behaviour?
> >
> >
> > Dave Schulz,
> >
> > Email: dschulz@dpsciences.com
> >
> >
> >
> > -----Original Message-----
> > From: kgannon@gmail.com [mailto:kgannon@gmail.com] On Behalf Of kevin
> > gannon
> > Sent: Thursday, November 10, 2005 12:09 PM
> > To: Schulz, Dave
> > Cc: Imal kalutotage; Cisco certification
> > Subject: Re: Sparse-dense mode example on frame - AutoRP
> >
> > show ip route 10.1.1.0 from Hub and R5......
> >
> > Regards
> > Kevin
> >
> > On 11/10/05, Schulz, Dave <DSchulz@dpsciences.com> wrote:
> > > Ah, yes! (my bad)....I changed that and also added the ip pim
> > nbma-mode
> > > on serial 0 at the hub and changed to ip pim sparse on this
> interface.
> > > Still nothing coming through to the hub. I think I may try a reboot
> > on
> > > the router, but didn't want to just jump to that conclusion.
> > >
> > >
> > > Dave Schulz,
> > > Email: dschulz@dpsciences.com
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: kgannon@gmail.com [mailto:kgannon@gmail.com] On Behalf Of
> > > kevin gannon
> > > Sent: Thursday, November 10, 2005 11:47 AM
> > > To: Schulz, Dave
> > > Cc: Imal kalutotage; Cisco certification
> > > Subject: Re: Sparse-dense mode example on frame - AutoRP
> > >
> > > Its a global command not per interface.
> > > Try moving the RP to R1 and leave it as the mapping agent as well.
> > >
> > > Regards
> > > Kevin
> > >
> > > On 11/10/05, Schulz, Dave <DSchulz@dpsciences.com> wrote:
> > > > Thanks, Kevin. You are right, it is a hidden command....it takes
> > it,
> > > > but does not show up under the interface config (hidden there too,
>
> > > > I guess). However, this doesn't seem to have any effect on the
> > > > groups
> > > from
> > > > the remote being sent to the hub router. I remember the
> > conversation
> > > on
> > > > GS about this, and I'll review it again. Something just seems a
> > > little
> > > > strange.
> > > >
> > > >
> > > > Dave Schulz,
> > > >
> > > > Email: dschulz@dpsciences.com
> > > >
> > > >
> > > >
> > > > -----Original Message-----
> > > > From: kgannon@gmail.com [mailto:kgannon@gmail.com] On Behalf Of
> > kevin
> > > > gannon
> > > > Sent: Thursday, November 10, 2005 10:57 AM
> > > > To: Schulz, Dave
> > > > Cc: Imal kalutotage; Cisco certification
> > > > Subject: Re: Sparse-dense mode example on frame - AutoRP
> > > >
> > > > If I am reading the post right "ip pim autorp listener" will help
> > you
> > > > here usually you will not forward Mcast and out the same
> interface.
> > > > In your case this would be the Hubs serial. I did a quick check
> > > > and 12.3 mainline should have this command as 12.2T does.
> > > > However be aware that in some code its a hidden command so try
> > > > typing it out exactly.
> > > >
> > > > There was a good discussion about this about a week ago with Scott
>
> > > > and the brians. It was about what else the listener command does
> > > > rather than just allowing dense mode for the autorp groups and
> > > > nothing else. Worth a read.
> > > >
> > > > Regards
> > > > Kevin
> > > >
> > > > On 11/10/05, Schulz, Dave <DSchulz@dpsciences.com> wrote:
> > > > > Thanks for response, Imal. My software load does not have the
> > auto
> > > rp
> > > > > listener command. I thought that the auto rp listener command
> > > allows
> > > > > the dense mode for the 39/40 groups for the rp and mapping.
> > However,
> > > I
> > > > > am using sparse-dense....doesn't this take control of this
> issue.
> > > So,
> > > > > is there a way to auto-rp before this command came about?
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Dave Schulz,
> > > > >
> > > > > Email: dschulz@dpsciences.com <mailto:dschulz@dpsciences.com%20>
> > > > >
> > > > >
> > > > >
> > > > > ________________________________
> > > > >
> > > > > From: Imal kalutotage [mailto:imal.kalutotage@gmail.com]
> > > > > Sent: Thursday, November 10, 2005 1:39 AM
> > > > > To: Schulz, Dave
> > > > > Subject: Re: Sparse-dense mode example on frame - AutoRP
> > > > >
> > > > >
> > > > >
> > > > > In this type of senario, most likely you have have a spoke to
> > spoke
> > > > > tunnel & with static mroutes.
> > > > >
> > > > > Otherwise, use "sparse-mode with ip pim auto rp listner. also
> > > > > use
> > ip
> > > > pim
> > > > > nbma mode on R2 s0/0
> > > > >
> > > > > But this works only for short time & rpf will fail. So you have
> > > > > to
> > > > alter
> > > > > the rpf with static mroute.
> > > > >
> > > > > HTH
> > > > >
> > > > > Imal
> > > > >
> > > > > On 11/9/05, Schulz, Dave <DSchulz@dpsciences.com> wrote:
> > > > >
> > > > > I am having an issue getting this multicast config to work
> > > correctly.
> > > > > Any ideas on what I am missing......
> > > > >
> > > > >
> > > > > R1 is the hub of a frame relay going to R5 and R6 as the
> > > > > remotes, running ospf. R1 is configured the mapping agent, and
> > > > > R5 as an RP (Auto-rp). I am joining to the group 239.6.6.6 at
> > > > > the Ethernet on
> > > R6.
> > > > > When I do a show ip igmp group at R6, I can see the multicast
> > group.
> > > > > However, I cannot see this group show up at R1 and R6. Any
> > > thoughts?
> > > > I
> > > > >
> > > > > am starting to think that I have a problem with the software
> > > > > load 12.3(5e). Sorry for the lengthy email. Any help or just
> > direction
> > > > > would be greatly appreciated.
> > > > >
> > > > > Any thoughts?
> > > > >
> > > > > R1......
> > > > > !
> > > > > ip multicast-routing
> > > > > isdn voice-call-failure 0
> > > > > !
> > > > > !
> > > > > interface Serial0
> > > > > ip address 10.10.10.1 255.255.255.0 ip pim sparse-dense-mode
> > > > > encapsulation frame-relay no ip mroute-cache no fair-queue
> > > > > frame-relay map ip 10.10.10.1 105 frame-relay map ip 10.10.10.5
> > > > > 105 broadcast frame-relay map ip 10.10.10.6 106 broadcast no
> > > > > frame-relay inverse-arp !
> > > > > router ospf 1
> > > > > router-id 10.10.10.10
> > > > > log-adjacency-changes
> > > > > network 10.10.10.0 0.0.0.255 area 0 neighbor 10.10.10.6 priority
>
> > > > > 1 neighbor 10.10.10.5 priority 1 !
> > > > > ip pim send-rp-discovery Serial0 scope 15
> > > > >
> > > > >
> > > > > R5.....
> > > > > !
> > > > > ip multicast-routing
> > > > > !
> > > > > interface Ethernet0
> > > > > ip address 10.1.1.5 255.255.255.0 !
> > > > > interface Serial0
> > > > > ip address 10.10.10.5 255.255.255.0 ip pim sparse-dense-mode
> > > > > encapsulation frame-relay no fair-queue frame-relay map ip
> > > > > 10.10.10.1 501 broadcast frame-relay map ip 10.10.10.5 501
> > > > > frame-relay map ip 10.10.10.6 501 no frame-relay inverse-arp !
> > > > > router ospf 1
> > > > > router-id 5.5.5.5
> > > > > log-adjacency-changes
> > > > > network 10.10.10.0 0.0.0.255 area 0 !
> > > > > ip pim send-rp-announce Serial0 scope 15 !
> > > > >
> > > > >
> > > > > R6......
> > > > > ip multicast-routing
> > > > > !
> > > > > !
> > > > > !
> > > > > interface Loopback0
> > > > > ip address 2.2.2.2 255.255.255.0 !
> > > > > interface Ethernet0
> > > > > ip address 10.1.1.6 255.255.255.0 ip pim sparse-dense-mode ip
> > > > > igmp join-group 239.6.6.6 !
> > > > > interface Serial0
> > > > > ip address 10.10.10.6 255.255.255.0 ip pim sparse-dense-mode
> > > > > encapsulation frame-relay frame-relay map ip 10.10.10.1 601
> > > > > broadcast frame-relay map ip 10.10.10.5 601 frame-relay map ip
> > > > > 10.10.10.6 601 no frame-relay inverse-arp !
> > > > > router ospf 1
> > > > > router-id 6.6.6.6
> > > > > log-adjacency-changes
> > > > > network 10.10.10.0 0.0.0.255 area 0
> > > > >
> > > > >
> > > > > R6#sh ip igmp group
> > > > > IGMP Connected Group Membership
> > > > > Group Address Interface Uptime Expires
> Last
> > > > > Reporter
> > > > > 239.6.6.6 Ethernet0 01:14:52 00:02:36
> > > 10.1.1.6
> > > > > 224.0.1.39 Serial0 01:16:41 00:02:17
> > > > 10.10.10.1
> > > > > 224.0.1.40 Serial0 01:16:46 00:02:25
> > > > 10.10.10.1
> > > > > R6#
> > > > >
> > > > > R1#sh ip igmp group
> > > > > IGMP Connected Group Membership
> > > > > Group Address Interface Uptime Expires
> Last
> > > > > Reporter
> > > > > 224.0.1.39 Serial0 01:19:44 00:02:54
> > > > 10.10.10.1
> > > > > 224.0.1.40 Serial0 01:22:30 00:02:50
> > > > 10.10.10.1
> > > > >
> > > > > R1#sh ip mrou
> > > > > IP Multicast Routing Table
> > > > > Flags: D - Dense, S - Sparse, B - Bidir Group, s - SSM Group, C
> > > > > - Connected,
> > > > > L - Local, P - Pruned, R - RP-bit set, F - Register flag,
> > > > > T - SPT-bit set, J - Join SPT, M - MSDP created entry,
> > > > > X - Proxy Join Timer Running, A - Candidate for MSDP
> > > > > Advertisement,
> > > > > U - URD, I - Received Source Specific Host Report, Z -
> > > > Multicast
> > > > > Tunnel
> > > > > Y - Joined MDT-data group, y - Sending to MDT-data group
> > > > > Outgoing interface flags: H - Hardware switched, A - Assert
> > > > > winner
> > > > > Timers: Uptime/Expires
> > > > > Interface state: Interface, Next-Hop or VCD, State/Mode
> > > > >
> > > > > (*, 224.0.1.39), 01:20:26/stopped, RP 0.0.0.0, flags: DCL
> > > > > Incoming interface: Null, RPF nbr 0.0.0.0
> > > > > Outgoing interface list:
> > > > > Serial0, Forward/Sparse-Dense, 01:20:26/00:00:00
> > > > >
> > > > > (10.10.10.5, 224.0.1.39), 01:18:50/00:02:09, flags: PLT
> > > > > Incoming interface: Serial0, RPF nbr 0.0.0.0
> > > > > Outgoing interface list: Null
> > > > >
> > > > > (*, 224.0.1.40), 01:23:13/00:02:07, RP 0.0.0.0, flags: DCL
> > > > > Incoming interface: Null, RPF nbr 0.0.0.0
> > > > > Outgoing interface list:
> > > > > Serial0, Forward/Sparse-Dense, 01:23:13/00:00:00
> > > > >
> > > > >
> > > > >
> > > > > R6#sh ip mrou
> > > > > IP Multicast Routing Table
> > > > > Flags: D - Dense, S - Sparse, B - Bidir Group, s - SSM Group, C
> > > > > - Connected,
> > > > > L - Local, P - Pruned, R - RP-bit set, F - Register flag,
> > > > > T - SPT-bit set, J - Join SPT, M - MSDP created entry,
> > > > > X - Proxy Join Timer Running, A - Candidate for MSDP
> > > > > Advertisement,
> > > > > U - URD, I - Received Source Specific Host Report, Z -
> > > > Multicast
> > > > > Tunnel
> > > > > Y - Joined MDT-data group, y - Sending to MDT-data group
> > > > > Outgoing interface flags: H - Hardware switched, A - Assert
> > > > > winner
> > > > > Timers: Uptime/Expires
> > > > > Interface state: Interface, Next-Hop or VCD, State/Mode
> > > > >
> > > > > (*, 239.6.6.6), 01:16:19/00:02:12, RP 10.10.10.5, flags: SJCL
> > > > > Incoming interface: Serial0, RPF nbr 10.10.10.5
> > > > > Outgoing interface list:
> > > > > Ethernet0, Forward/Sparse-Dense, 01:16:19/00:02:12
> > > > >
> > > > > (*, 224.0.1.39 ), 01:17:59/00:02:56, RP 0.0.0.0, flags: DC
> > > > > Incoming interface: Null, RPF nbr 0.0.0.0
> > > > > Outgoing interface list:
> > > > > Serial0, Forward/Sparse-Dense, 01:17:59/00:00:00
> > > > >
> > > > > (*, 224.0.1.40), 01:18:05/stopped, RP 0.0.0.0, flags: DCL
> > > > > Incoming interface: Null, RPF nbr 0.0.0.0
> > > > > Outgoing interface list:
> > > > > Serial0, Forward/Sparse-Dense, 01:18:05/00:00:00
> > > > >
> > > > > (10.10.10.1, 224.0.1.40), 01:18:05/00:02:22, flags: PLT
> > > > > Incoming interface: Serial0, RPF nbr 0.0.0.0
> > > > > Outgoing interface list: Null
> > > > >
> > > > >
> > > > > Dave Schulz
> > > > > Email: dschulz@dpsciences.com <mailto: dschulz@dpsciences.com
> > > > > <mailto:dschulz@dpsciences.com> >
> > > > >
> > > > >
> > > >
> > >
> > ______________________________________________________________________
> > _
> > > > > Subscription information may be found at:
> > > > > http://www.groupstudy.com/list/CCIELab.html
> > > > >
> > > > >
> > > >
> > >
> > ______________________________________________________________________
> > _
> > > > > Subscription information may be found at:
> > > > > http://www.groupstudy.com/list/CCIELab.html
> > > > >
> > > > > --
> > > > > This message has been scanned for viruses and dangerous content
> > > > > by MailScanner, and is believed to be clean.
> > > >
> > > >
> > >
> > ______________________________________________________________________
> > _
> > > > Subscription information may be found at:
> > > > http://www.groupstudy.com/list/CCIELab.html
> > > >
> > > > --
> > > > This message has been scanned for viruses and dangerous content by
>
> > > > MailScanner, and is believed to be clean.
> > > >
> > > >
> > >
> > > --
> > > This message has been scanned for viruses and dangerous content by
> > > MailScanner, and is believed to be clean.
> > >
> > >
> >
> > --
> > This message has been scanned for viruses and dangerous content by
> > MailScanner, and is believed to be clean.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:06 GMT-3