From: Schulz, Dave (DSchulz@dpsciences.com)
Date: Wed Nov 09 2005 - 17:00:53 GMT-3
I am having an issue getting this multicast config to work correctly.
Any ideas on what I am missing......
R1 is the hub of a frame relay going to R5 and R6 as the remotes,
running ospf. R1 is configured the mapping agent, and R5 as an RP
(Auto-rp). I am joining to the group 239.6.6.6 at the Ethernet on R6.
When I do a show ip igmp group at R6, I can see the multicast group.
However, I cannot see this group show up at R1 and R6. Any thoughts? I
am starting to think that I have a problem with the software load
12.3(5e). Sorry for the lengthy email. Any help or just direction
would be greatly appreciated.
Any thoughts?
R1......
!
ip multicast-routing
isdn voice-call-failure 0
!
!
interface Serial0
ip address 10.10.10.1 255.255.255.0
ip pim sparse-dense-mode
encapsulation frame-relay
no ip mroute-cache
no fair-queue
frame-relay map ip 10.10.10.1 105
frame-relay map ip 10.10.10.5 105 broadcast
frame-relay map ip 10.10.10.6 106 broadcast
no frame-relay inverse-arp
!
router ospf 1
router-id 10.10.10.10
log-adjacency-changes
network 10.10.10.0 0.0.0.255 area 0
neighbor 10.10.10.6 priority 1
neighbor 10.10.10.5 priority 1
!
ip pim send-rp-discovery Serial0 scope 15
R5.....
!
ip multicast-routing
!
interface Ethernet0
ip address 10.1.1.5 255.255.255.0
!
interface Serial0
ip address 10.10.10.5 255.255.255.0
ip pim sparse-dense-mode
encapsulation frame-relay
no fair-queue
frame-relay map ip 10.10.10.1 501 broadcast
frame-relay map ip 10.10.10.5 501
frame-relay map ip 10.10.10.6 501
no frame-relay inverse-arp
!
router ospf 1
router-id 5.5.5.5
log-adjacency-changes
network 10.10.10.0 0.0.0.255 area 0
!
ip pim send-rp-announce Serial0 scope 15
!
R6......
ip multicast-routing
!
!
!
interface Loopback0
ip address 2.2.2.2 255.255.255.0
!
interface Ethernet0
ip address 10.1.1.6 255.255.255.0
ip pim sparse-dense-mode
ip igmp join-group 239.6.6.6
!
interface Serial0
ip address 10.10.10.6 255.255.255.0
ip pim sparse-dense-mode
encapsulation frame-relay
frame-relay map ip 10.10.10.1 601 broadcast
frame-relay map ip 10.10.10.5 601
frame-relay map ip 10.10.10.6 601
no frame-relay inverse-arp
!
router ospf 1
router-id 6.6.6.6
log-adjacency-changes
network 10.10.10.0 0.0.0.255 area 0
R6#sh ip igmp group
IGMP Connected Group Membership
Group Address Interface Uptime Expires Last
Reporter
239.6.6.6 Ethernet0 01:14:52 00:02:36 10.1.1.6
224.0.1.39 Serial0 01:16:41 00:02:17 10.10.10.1
224.0.1.40 Serial0 01:16:46 00:02:25 10.10.10.1
R6#
R1#sh ip igmp group
IGMP Connected Group Membership
Group Address Interface Uptime Expires Last
Reporter
224.0.1.39 Serial0 01:19:44 00:02:54 10.10.10.1
224.0.1.40 Serial0 01:22:30 00:02:50 10.10.10.1
R1#sh ip mrou
IP Multicast Routing Table
Flags: D - Dense, S - Sparse, B - Bidir Group, s - SSM Group, C -
Connected,
L - Local, P - Pruned, R - RP-bit set, F - Register flag,
T - SPT-bit set, J - Join SPT, M - MSDP created entry,
X - Proxy Join Timer Running, A - Candidate for MSDP
Advertisement,
U - URD, I - Received Source Specific Host Report, Z - Multicast
Tunnel
Y - Joined MDT-data group, y - Sending to MDT-data group
Outgoing interface flags: H - Hardware switched, A - Assert winner
Timers: Uptime/Expires
Interface state: Interface, Next-Hop or VCD, State/Mode
(*, 224.0.1.39), 01:20:26/stopped, RP 0.0.0.0, flags: DCL
Incoming interface: Null, RPF nbr 0.0.0.0
Outgoing interface list:
Serial0, Forward/Sparse-Dense, 01:20:26/00:00:00
(10.10.10.5, 224.0.1.39), 01:18:50/00:02:09, flags: PLT
Incoming interface: Serial0, RPF nbr 0.0.0.0
Outgoing interface list: Null
(*, 224.0.1.40), 01:23:13/00:02:07, RP 0.0.0.0, flags: DCL
Incoming interface: Null, RPF nbr 0.0.0.0
Outgoing interface list:
Serial0, Forward/Sparse-Dense, 01:23:13/00:00:00
R6#sh ip mrou
IP Multicast Routing Table
Flags: D - Dense, S - Sparse, B - Bidir Group, s - SSM Group, C -
Connected,
L - Local, P - Pruned, R - RP-bit set, F - Register flag,
T - SPT-bit set, J - Join SPT, M - MSDP created entry,
X - Proxy Join Timer Running, A - Candidate for MSDP
Advertisement,
U - URD, I - Received Source Specific Host Report, Z - Multicast
Tunnel
Y - Joined MDT-data group, y - Sending to MDT-data group
Outgoing interface flags: H - Hardware switched, A - Assert winner
Timers: Uptime/Expires
Interface state: Interface, Next-Hop or VCD, State/Mode
(*, 239.6.6.6), 01:16:19/00:02:12, RP 10.10.10.5, flags: SJCL
Incoming interface: Serial0, RPF nbr 10.10.10.5
Outgoing interface list:
Ethernet0, Forward/Sparse-Dense, 01:16:19/00:02:12
(*, 224.0.1.39), 01:17:59/00:02:56, RP 0.0.0.0, flags: DC
Incoming interface: Null, RPF nbr 0.0.0.0
Outgoing interface list:
Serial0, Forward/Sparse-Dense, 01:17:59/00:00:00
(*, 224.0.1.40), 01:18:05/stopped, RP 0.0.0.0, flags: DCL
Incoming interface: Null, RPF nbr 0.0.0.0
Outgoing interface list:
Serial0, Forward/Sparse-Dense, 01:18:05/00:00:00
(10.10.10.1, 224.0.1.40), 01:18:05/00:02:22, flags: PLT
Incoming interface: Serial0, RPF nbr 0.0.0.0
Outgoing interface list: Null
Dave Schulz
Email: dschulz@dpsciences.com <mailto:dschulz@dpsciences.com >
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:06 GMT-3