From: James Ventre (messageboard@ventrefamily.com)
Date: Tue Nov 08 2005 - 09:06:25 GMT-3
ip ospf mtu-ignore
James
Jaycee Cockburn - BCX SS wrote:
> Hi Again,
> Before I forget...
> There might also be a command for "ignoring" these size mismatches...
> Check it out, shout if you can't get it!
>
> Cheers again
> JC
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Jerricho Grivano
> Sent: 08 November 2005 01:26 PM
> To: ccielab@groupstudy.com
> Subject: state - EXSTART/DR
>
> Hi, anybody can help me? why the state EXSTART/DR, and i get message in
> SW1 :
>
> Rack2SW1#
> 16:18:47: %OSPF-5-ADJCHG: Process 2, Nbr 150.2.2.2 on FastEthernet0/2
> from EXSTART to DOWN, Neighbor Down: Too many DBD retransmitions
>
>
> Rack2R2#sh ip ospf neigh
>
> Neighbor ID Pri State Dead Time Address
> Interface
> 150.2.1.1 1 FULL/DR 00:01:36 191.2.125.1
> Serial0/0
> 150.2.3.3 0 FULL/ - 00:00:35 191.2.23.3
> Serial0/1
> 150.2.7.7 1 EXSTART/DR 00:00:38 191.2.27.7
> FastEthernet0/0
>
>
> Thanks
> Jerricho
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:05 GMT-3