From: Jaycee Cockburn - BCX SS (Jaycee.Cockburn@bcx.co.za)
Date: Tue Nov 08 2005 - 08:58:58 GMT-3
Hi Again,
Before I forget...
There might also be a command for "ignoring" these size mismatches...
Check it out, shout if you can't get it!
Cheers again
JC
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Jerricho Grivano
Sent: 08 November 2005 01:26 PM
To: ccielab@groupstudy.com
Subject: state - EXSTART/DR
Hi, anybody can help me? why the state EXSTART/DR, and i get message in
SW1 :
Rack2SW1#
16:18:47: %OSPF-5-ADJCHG: Process 2, Nbr 150.2.2.2 on FastEthernet0/2
from EXSTART to DOWN, Neighbor Down: Too many DBD retransmitions
Rack2R2#sh ip ospf neigh
Neighbor ID Pri State Dead Time Address
Interface
150.2.1.1 1 FULL/DR 00:01:36 191.2.125.1
Serial0/0
150.2.3.3 0 FULL/ - 00:00:35 191.2.23.3
Serial0/1
150.2.7.7 1 EXSTART/DR 00:00:38 191.2.27.7
FastEthernet0/0
Thanks
Jerricho
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:05 GMT-3