From: Schulz, Dave (DSchulz@dpsciences.com)
Date: Sun Nov 06 2005 - 20:46:47 GMT-3
This is a great question. My understanding is that this matches
everything else that remains (undefined by other classes). Therefore,
you don't have to actually define the class, as it is a default class.
Dave Schulz,
Email: dschulz@dpsciences.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
cscoitit cscoitit
Sent: Sunday, November 06, 2005 6:03 PM
To: ccielab@groupstudy.com
Subject: frame relay and ecn configuration
Hi friends,
I took thie example from cisco web site. Does this policy map apply to
whole traffic passing over the interface(because class class-default is
defined) or do we have define a named class.
tks
Enabling ECN Example
The following example enables ECN in the policy map called pol1:
Router(config)# policy-map pol1
Router(config-pmap)# class class-default
Router(config-pmap)# bandwidth per 70
Router(config-pmap-c)# random-detect
Router(config-pmap-c)# random-detect ecn
---------------------------------
Find your next car at Yahoo! Canada Autos
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:05 GMT-3