From: Desmond Ong (desmond.gk@netstarnetworks.com)
Date: Sun Nov 06 2005 - 08:44:15 GMT-3
Hi there,
i am having some doubts while doing my workbooks...
1) if i want to prevent telnet access to my router, i need to put in
access-class XXX under line vty 0 4. do i need to put it under line vty 5
15?
2) how to determine which side of the isdn router to put the isdn ospf
demand circuit command? can i put on both sides?
3)when ask not to use static mapping on atm, how to i configure
4) under atm, when ask not to rely on remote router for arp, i need to
configure "no protocol ip inarp" together with no atm "ilmi-keepalive"
right?
5) under frame-relay, when ask not to rely on remote router for arp, i need
to put " no frame-relay inarp", how about no arp frame-relay" so that i will
not response to other router arp request...
6)Does the "dialer-load threshold either" command need to put on both side
of the isdn router when not explicitly asked?
7)when configuring bgp, if by next hop is available by IGP, can i still put
in the next-hop-self command under every peering to ibgp peers?
8)ipv6 - do we need to put in eui-64 for site local address? i understand is
for automatically assigning the host portion of the address...
apologise for the lengthy questions.....
Thanks!
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:05 GMT-3