Re: How to know the remote-as at your neighbor configured?

From: Thomas Braun (thomas.braun@flashstudy.de)
Date: Fri Nov 04 2005 - 15:02:37 GMT-3

• Next message: Brian Dennis: "RE: Frame Relay DLCI numbers"
• Previous message: Venkataramanaiah.R: "Re: unicast rpf check"
• Maybe in reply to: Venkataramanaiah.R: "How to know the remote-as at your neighbor configured?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi,

>
>
> sorry,i misread your question.
> BGP: 192.168.1.1 went from Idle to Active
> BGP: 192.168.1.1 open active, delay 9069ms
> BGP: 192.168.1.1 open active, local address 192.168.1.2
> BGP: 192.168.1.1 went from Active to OpenSent
> BGP: 192.168.1.1 sending OPEN, version 4, my as: 3
> BGP: 192.168.1.1 rcv message type 3, length (excl. header) 4
> %BGP-3-NOTIFICATION: received from neighbor 192.168.1.1 2/2 (peer in
> wrong AS) 2

forget it, i can't read today. :)
Maybe i have to sleep.

cu thomas

• Next message: Brian Dennis: "RE: Frame Relay DLCI numbers"
• Previous message: Venkataramanaiah.R: "Re: unicast rpf check"
• Maybe in reply to: Venkataramanaiah.R: "How to know the remote-as at your neighbor configured?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:05 GMT-3