From: Andy Tang (andytang88@gmail.com)
Date: Mon Oct 31 2005 - 20:05:57 GMT-3
Hi Jongsoo,
Thank you for your prompt response. I tried to remove the spanning-tree
portfast command but I got the same result.
Regards/Andy
On 11/1/05, Jongsoo <bstrt2004@gmail.com> wrote:
>
> I believe "spanning-tree portfast" disable STP.
>
> On 10/31/05, Andy Tang <andytang88@gmail.com> wrote:
>
> > Hello,
> > I am appreciated if someone can advise the reason why "no spanning tree
> > info available for FastEthernet0/7"
> > interface FastEthernet0/7
> > switchport access vlan 50
> > switchport mode access
> > speed 100
> > duplex full
> > spanning-tree portfast
> > spanning-tree bpduguard enable
> > end
> >
> > Rack8SW1#s vlan brie
> > VLAN Name Status Ports
> > ---- -------------------------------- ---------
> > -------------------------------
> > 1 default active Fa0/4, Fa0/11, Fa0/12, Fa0/16
> > Fa0/17, Fa0/18, Fa0/19, Fa0/20
> > Fa0/21, Fa0/22, Fa0/23, Gi0/1
> > Gi0/2
> > 2 VLAN0002 active Fa0/2
> > 3 VLAN0003 active Fa0/3
> > 8 VLAN0008 active Fa0/24
> > 17 VLAN0017 active Fa0/1
> > 33 VLAN0033 active
> > 46 VLAN0046 active
> > 50 VLAN0050 active Fa0/7, Fa0/8, Fa0/9, Fa0/10
> > 58 VLAN0058 active Fa0/5
> > 1002 fddi-default act/unsup
> > 1003 token-ring-default act/unsup
> > 1004 fddinet-default act/unsup
> > 1005 trnet-default act/unsup
> > Rack8SW1#
> > Rack8SW1#s spanning-tree interface f0/7 detail
> > no spanning tree info available for FastEthernet0/7
> > Thanks & regards,
> > Andy
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:55 GMT-3