From: Jongsoo (bstrt2004@gmail.com)
Date: Mon Oct 31 2005 - 19:52:16 GMT-3
I believe "spanning-tree portfast" disable STP.
On 10/31/05, Andy Tang <andytang88@gmail.com> wrote:
>
> Hello,
> I am appreciated if someone can advise the reason why "no spanning tree
> info available for FastEthernet0/7"
> interface FastEthernet0/7
> switchport access vlan 50
> switchport mode access
> speed 100
> duplex full
> spanning-tree portfast
> spanning-tree bpduguard enable
> end
>
> Rack8SW1#s vlan brie
> VLAN Name Status Ports
> ---- -------------------------------- ---------
> -------------------------------
> 1 default active Fa0/4, Fa0/11, Fa0/12, Fa0/16
> Fa0/17, Fa0/18, Fa0/19, Fa0/20
> Fa0/21, Fa0/22, Fa0/23, Gi0/1
> Gi0/2
> 2 VLAN0002 active Fa0/2
> 3 VLAN0003 active Fa0/3
> 8 VLAN0008 active Fa0/24
> 17 VLAN0017 active Fa0/1
> 33 VLAN0033 active
> 46 VLAN0046 active
> 50 VLAN0050 active Fa0/7, Fa0/8, Fa0/9, Fa0/10
> 58 VLAN0058 active Fa0/5
> 1002 fddi-default act/unsup
> 1003 token-ring-default act/unsup
> 1004 fddinet-default act/unsup
> 1005 trnet-default act/unsup
> Rack8SW1#
> Rack8SW1#s spanning-tree interface f0/7 detail
> no spanning tree info available for FastEthernet0/7
> Thanks & regards,
> Andy
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:55 GMT-3