From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Fri Oct 28 2005 - 04:54:06 GMT-3
I know that Scott will give us the clear concept, but in the meanwhile
http://www.groupstudy.com/archives/ccielab/200207/msg01224.html
----- Original Message -----
From: "Nawaz, Ajaz" <Ajaz.Nawaz@bskyb.com>
To: "Scott Morris" <swm@emanon.com>; <jnkmail4eva@yahoo.com>;
<ccielab@groupstudy.com>
Cc: "Victor Cappuccio" <cvictor@protokolgroup.com>
Sent: Friday, October 28, 2005 3:44 AM
Subject: RE: RIP question
> Scott,
>
> So what are your thoughts about Victor's suggestion and no
> validate-update-source?
>
> I have to confess I have not tested this myself yet - as you can see I'm
> currently playing cathcup with gs reading.
>
> Ajaz Nawaz
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Scott Morris
> Sent: 25 October 2005 05:00
> To: jnkmail4eva@yahoo.com; ccielab@groupstudy.com
> Subject: RE: RIP question
>
> You need to actually understand what the network command does, and that
will
> help answer your question.
>
> The network command in RIP does not announce a route directly. What it
does
> is activate an interface as "participating" in the RIP process. That in
> turn brings the specific route into the RIB and announces it out.
However,
> following that same logic, in order to activate an interface as
> participating, you need to have an interface configured to do so.
>
> You aren't allowed to make things up. But, on the other hand, that's why
> (insert Deity-du-jour here) created loopback interfaces! ;)
>
> BGP is similar, but the route must exist in the routing table before it
can
> be brought into the BGP RIB.
>
> HTH,
>
> Scott
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> jnkmail4eva@yahoo.com
> Sent: Monday, October 24, 2005 9:01 PM
> To: ccielab@groupstudy.com
> Subject: RIP question
>
> I have playing aroud with RIP on two routers, A and B connected via
ethernet
> belonging to the same vlan.
>
> I want to see if I can announce a network from router A to B, even though
> there is no interface on A belonging to that network.
>
> ==========================================
> router A
> int e0/0
> ip addres 192.168.1.1 255.255.255.0
>
> router rip
> version 2
> no auto-summary
> network 192.168.0.0
> netwrok 10.10.10.0
> ==========================================
> ==========================================
> router B
> int e0/0
> ip addres 192.168.1.2 255.255.255.0
>
> router rip
> version 2
> no auto-summary
> network 192.168.0.0
> ==========================================
> I don't see 10.0.0.0/8 on router B.
> I tried introducing a loopback on A belonging to the 10.0.0.0/8 network
but
> i couldn't see the network on B.
>
> Is there anyway of having rip announcing the 10 network so it shows up on
> B's routing table learned via RIP.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> -----------------------------------------
> Information in this email may be privileged, confidential and is intended
> exclusively for the addressee. The views expressed may not be official
> policy, but the personal views of the originator. If you have received it
> in error, please notify the sender by return e-mail and delete it from
your
> system. You should not reproduce, distribute, store, retransmit, use or
> disclose its contents to anyone. Please note we reserve the right to
> monitor all e-mail communication through our internal and external
> networks.
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:54 GMT-3