From: Bajo (bajoalex@gmail.com)
Date: Thu Oct 27 2005 - 01:36:18 GMT-3
Hi Simon,
"show ip eigrp neighbors" will show u the hold time.
On 10/26/05, simon hart <simon@harttel.com> wrote:
>
> For OSPF do a show ip ospf interface - this will show network types and
> timers
>
> For Eigrp, really you have to remember the defaults, I do not believe
> there
> is a command that will give you this information. If you forget the
> defaults lookup the command ip hello-interval eigrp on the DocCd
>
> NBMA networks 60 seconds - All other networks 5 seconds
> Holdtime 3*60 and 3*5
>
> HTH
>
> Simon
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> KSGoh
> Sent: 26 October 2005 17:01
> To: Cisco certification
> Subject: ospf timer!
>
>
> any idea on how can i findout the timer value for eigrp and ospf ?
> what command should i use.. especially eigrp hello timer..
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.361 / Virus Database: 267.12.5/149 - Release Date: 25/10/2005
>
> --
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.1.361 / Virus Database: 267.12.5/149 - Release Date: 25/10/2005
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Kind Regards,Bajo
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:54 GMT-3