From: simon hart (simon@harttel.com)
Date: Thu Oct 27 2005 - 03:34:07 GMT-3
Hi Bajo,
Yes you are right, however it shows it counting down. So if you hit the
command several times you may get to see what the absolute time is, but a
little hit and miss.
If it is anything other than the default the best command would be sh run
interface xx
Simon
-----Original Message-----
From: Bajo [mailto:bajoalex@gmail.com]
Sent: 27 October 2005 05:36
To: simon hart
Cc: KSGoh; Cisco certification
Subject: Re: ospf timer!
Hi Simon,
"show ip eigrp neighbors" will show u the hold time.
On 10/26/05, simon hart <simon@harttel.com> wrote:
For OSPF do a show ip ospf interface - this will show network types and
timers
For Eigrp, really you have to remember the defaults, I do not believe
there
is a command that will give you this information. If you forget the
defaults lookup the command ip hello-interval eigrp on the DocCd
NBMA networks 60 seconds - All other networks 5 seconds
Holdtime 3*60 and 3*5
HTH
Simon
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
KSGoh
Sent: 26 October 2005 17:01
To: Cisco certification
Subject: ospf timer!
any idea on how can i findout the timer value for eigrp and ospf ?
what command should i use.. especially eigrp hello timer..
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.361 / Virus Database: 267.12.5/149 - Release Date:
25/10/2005
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.361 / Virus Database: 267.12.5/149 - Release Date:
25/10/2005
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
--
Kind Regards,
Bajo
-- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.361 / Virus Database: 267.12.5/149 - Release Date: 25/10/2005
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:54 GMT-3