RE: ospf timer!

From: simon hart (simon@harttel.com)
Date: Wed Oct 26 2005 - 14:17:07 GMT-3

• Next message: simon hart: "RE: Different Command Format on BGP routing process"
• Previous message: George Amen: "Re: US Immigration office in Raleigh/Durham NC"
• Maybe in reply to: KSGoh: "ospf timer!"
• Next in thread: Bajo: "Re: ospf timer!"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

For OSPF do a show ip ospf interface - this will show network types and
timers

For Eigrp, really you have to remember the defaults, I do not believe there
is a command that will give you this information. If you forget the
defaults lookup the command ip hello-interval eigrp on the DocCd

NBMA networks 60 seconds - All other networks 5 seconds
Holdtime 3*60 and 3*5

HTH

Simon

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of KSGoh
Sent: 26 October 2005 17:01
To: Cisco certification
Subject: ospf timer!

any idea on how can i findout the timer value for eigrp and ospf ?
what command should i use.. especially eigrp hello timer..

• Next message: simon hart: "RE: Different Command Format on BGP routing process"
• Previous message: George Amen: "Re: US Immigration office in Raleigh/Durham NC"
• Maybe in reply to: KSGoh: "ospf timer!"
• Next in thread: Bajo: "Re: ospf timer!"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:54 GMT-3