From: Chris Lewis (chrlewiscsco@yahoo.com)
Date: Wed Oct 26 2005 - 09:26:59 GMT-3
What is the output of the debug dialer?
Prio Utomo <rionaldi@gmail.com> wrote:I configure ISIS between 2 routers connected with Serial and ISDN to simulate
Dial on Demand using Dialer Watch.
When I put the serial off, the dialer watch triggered and call the opposite
router, but when I turn on the serial again. The dialer watch won't go down,
when i debug the result as below
*Mar 1 04:27:16.878: BR0/0:1 DDR: idle timeout
*Mar 1 04:27:16.878: DDR: Dialer Watch: watch-group = 1
*Mar 1 04:27:16.878: DDR: network 150.2.4.0/255.255.255.0 UP,
*Mar 1 04:27:16.878: DDR: primary DOWN
I understand that the router still receving 150.2.4.0/255.255.255.0 from the
BRI. I increase the metric of isis in BRI but still the isdn does not off.
Any suggestion why this condition happen, how to resolve?
Thx,
rionaldi
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:54 GMT-3