Re: Extended ACL Filtering in RIP- Distribute-list

From: Arun Arumuganainar (aarumuga@hotmail.com)
Date: Tue Oct 25 2005 - 12:51:34 GMT-3

Next message: brad ellis: "Re: Question about NBAR.. not really related to CCIE lab"
Previous message: Jung, Jin: "Inter-VLAN routing to external firewall???"
Maybe in reply to: The Great Ryan: "Extended ACL Filtering in RIP- Distribute-list"
Next in thread: Brian McGahan: "RE: Extended ACL Filtering in RIP- Distribute-list"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

It seems that distribute list in RIP , EIGRP or IGRP supports only standard
access list .

Extended Access lists are not supported .Pls. refer to command reference for
details .

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/ip_r
/iprprt2/1rdrip.htm#wp1025120

Thanks and Regards
Arun
----- Original Message -----
From: "The Great Ryan" <pv.ryan@gmail.com>
To: "Javier Tomi" <fjtm@tid.es>
Cc: "Cisco certification" <ccielab@groupstudy.com>
Sent: Tuesday, October 25, 2005 12:50 PM
Subject: Re: Extended ACL Filtering in RIP- Distribute-list

> I tried to use it in redistribute between EIGRP and OSPF. it work fine.
> but fail to apply on RIP.
> I guess Extended ACL is not fully supported in 12.2T.
>
> Just want to confirm. Thanks !
>
>
>
> Ryan
>
>
> 2005/10/25, Javier Tomi <fjtm@tid.es>:
> > As far as I know that only stands for BGP, but I have never test it on
> > other routing protocols...
> >
> >
> >
> > The Great Ryan wrote:
> >
> > >Hi Group,
> > >
> > >I create a distribute-list test in rip using ACL and want to allow
> > >only Even route into my router. I can do it sucessfully by using
> > >Standard ACL. I heard from this group that Extended ACL is better
> > >because it also checks with netmask. However, I can't get any route
> > >after using Extended ACL. Anything wrong ? My ACLs are as follows:
> > >
> > >access-list 1 permit 172.16.0.0 0.0.254.0
> > >access-list 101 permit ip 172.16.0.0 0.0.254.0 255.255.255.0 0.0.0.0
> > >
> > >
> > >Incoming RIP routes
> > >==================
> > >00:47:53: 172.16.0.0/24 via 0.0.0.0 in 1 hops
> > >00:47:53: 172.16.1.0/24 via 0.0.0.0 in 1 hops
> > >00:47:53: 172.16.2.0/24 via 0.0.0.0 in 1 hops
> > >00:47:53: 172.16.3.0/24 via 0.0.0.0 in 1 hops
> > >00:47:53: 172.16.4.0/24 via 0.0.0.0 in 1 hops
> > >00:47:53: 172.16.5.0/24 via 0.0.0.0 in 1 hops
> > >00:47:53: 172.16.6.0/24 via 0.0.0.0 in 1 hops
> > >00:47:53: 172.16.7.0/24 via 0.0.0.0 in 1 hops
> > >00:47:53: 172.16.8.0/24 via 0.0.0.0 in 1 hops
> > >00:47:53: 172.16.9.0/24 via 0.0.0.0 in 1 hops
> > >00:47:53: 172.16.10.0/24 via 0.0.0.0 in 1 hops
> > >00:47:53: 172.16.11.0/24 via 0.0.0.0 in 1 hops
> > >00:47:53: 172.16.12.0/24 via 0.0.0.0 in 1 hops
> > >00:47:53: 172.16.13.0/24 via 0.0.0.0 in 1 hops
> > >00:47:53: 172.16.14.0/24 via 0.0.0.0 in 1 hops
> > >00:47:53: 172.16.15.0/24 via 0.0.0.0 in 1 hops
> > >00:47:53: 172.16.16.0/24 via 0.0.0.0 in 1 hops
> > >
> > >
> > >
> > >Ryan
> > >
> > >_______________________________________________________________________
> > >Subscription information may be found at:
> > >http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Next message: brad ellis: "Re: Question about NBAR.. not really related to CCIE lab"
Previous message: Jung, Jin: "Inter-VLAN routing to external firewall???"
Maybe in reply to: The Great Ryan: "Extended ACL Filtering in RIP- Distribute-list"
Next in thread: Brian McGahan: "RE: Extended ACL Filtering in RIP- Distribute-list"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:53 GMT-3