Extended ACL Filtering in RIP- Distribute-list

From: The Great Ryan (pv.ryan@gmail.com)
Date: Tue Oct 25 2005 - 00:07:13 GMT-3


Hi Group,

I create a distribute-list test in rip using ACL and want to allow
only Even route into my router. I can do it sucessfully by using
Standard ACL. I heard from this group that Extended ACL is better
because it also checks with netmask. However, I can't get any route
after using Extended ACL. Anything wrong ? My ACLs are as follows:

access-list 1 permit 172.16.0.0 0.0.254.0
access-list 101 permit ip 172.16.0.0 0.0.254.0 255.255.255.0 0.0.0.0

Incoming RIP routes
==================
00:47:53: 172.16.0.0/24 via 0.0.0.0 in 1 hops
00:47:53: 172.16.1.0/24 via 0.0.0.0 in 1 hops
00:47:53: 172.16.2.0/24 via 0.0.0.0 in 1 hops
00:47:53: 172.16.3.0/24 via 0.0.0.0 in 1 hops
00:47:53: 172.16.4.0/24 via 0.0.0.0 in 1 hops
00:47:53: 172.16.5.0/24 via 0.0.0.0 in 1 hops
00:47:53: 172.16.6.0/24 via 0.0.0.0 in 1 hops
00:47:53: 172.16.7.0/24 via 0.0.0.0 in 1 hops
00:47:53: 172.16.8.0/24 via 0.0.0.0 in 1 hops
00:47:53: 172.16.9.0/24 via 0.0.0.0 in 1 hops
00:47:53: 172.16.10.0/24 via 0.0.0.0 in 1 hops
00:47:53: 172.16.11.0/24 via 0.0.0.0 in 1 hops
00:47:53: 172.16.12.0/24 via 0.0.0.0 in 1 hops
00:47:53: 172.16.13.0/24 via 0.0.0.0 in 1 hops
00:47:53: 172.16.14.0/24 via 0.0.0.0 in 1 hops
00:47:53: 172.16.15.0/24 via 0.0.0.0 in 1 hops
00:47:53: 172.16.16.0/24 via 0.0.0.0 in 1 hops

Ryan



This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:52 GMT-3