From: Niche (jackyliu419@gmail.com)
Date: Mon Oct 24 2005 - 05:28:18 GMT-3
Hi guys,
Just want to ask for further information..
How to make VRRP to only use 2 ip addresses only instead of standard 3 ip
addresses format?
I have checked the 12.2(13)T documentation about VRRP, I couldn't find any
configuration example for reference on this.
Cheers~
Jacky
On 10/24/05, Thomwin Chen <thomwin_chen@yahoo.com> wrote:
>
> A Not So Elegant way is to type vrrp 1 syntax on the interface.
> if you can't type vrrp 1, perhaps the solution prefer HSRP. :)
>
> just a thought...
>
> Rgds,
> Thomwin
>
> Chris Lewis <chrlewiscsco@yahoo.com> wrote:
> Hi,
>
> Just looking for opinions and input.
>
> Comparing HSRP and VRRP, I conclude:
>
> VRRP has preempt on by default, therefore does not need it configured like
> HSRP does.
> HSRP can use enhanced object tracking
> (to track more than just line protocol up/down as follows)
> track 100 interface serial1/0 ip routing
> interface Ethernet0/0
> standby 1 track 100 decrement 10
> I do not see a command option for VRRP to use track, even though the
> enhanced object tracking documentation suggets there is. So I conclude VRRP
> cannot track the status of one of its interfaces like HSRP can.
> To load balance between routers, HSRP and VRRP can have different groups
> to prefer different routers, but anything more sophisticated required GLBP
> Any comments or other differentiators?
>
> Chris
>
>
>
> ---------------------------------
> Yahoo! FareChase - Search multiple travel sites in one click.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> ---------------------------------
> Yahoo! FareChase - Search multiple travel sites in one click.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:52 GMT-3