From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Sun Oct 23 2005 - 13:28:21 GMT-3
You are missing a dialer map for the watched route.
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Nadeem Zahid (iszahid)
Sent: Sunday, October 23, 2005 9:19 AM
To: ccielab@groupstudy.com
Subject: Dialer Watch
Somehow my DW is not working...when I shut down the FR link from remote
end or
from the FR switch, it vanishes from the routing table, but DW is not
triggered...
In the past I had inconsistency and do not want to waste any time in the
lab on these
things. Would like to know some tips on testing DW in the lab...?
Also, how would you test backup interface when you cannot make the line
go down
(I guess no access to FR switch) in the lab...?
interface BRI0/0
description *** to R5 ***
ip address 136.1.45.4 255.255.255.248
encapsulation ppp
dialer idle-timeout 5
dialer map ip 136.1.45.5 name Rack02R5 broadcast 40811
dialer watch-group 1 <---------------------
dialer-group 1
isdn switch-type basic-ni
isdn spid1 40821 40821
no peer neighbor-route
compress stac
ppp chap password 0 CISCO
no clns route-cache
!
dialer watch-list 1 ip 150.1.5.0 255.255.255.0 <------ Loopback of R5
dialer watch-list 1 delay route-check initial 120
dialer watch-list 1 delay disconnect 30
Rack02R4#sh ip route 150.1.5.0
Routing entry for 150.1.5.0/24
Known via "ospf 1", distance 110, metric 65, type intra area
Last update from 136.1.245.5 on Serial0/0, 00:05:29 ago
Routing Descriptor Blocks:
* 136.1.245.5, from 150.1.5.5, 00:05:29 ago, via Serial0/0
Route metric is 65, traffic share count is 1
thnx
Nadeem
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:52 GMT-3