From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Sat Oct 22 2005 - 10:33:53 GMT-3
Hello Stefan, Are you allowed to break your topology in Area?, the first
thing that come into my mine is make R3 R2 and R4 in the same area, lets
say Area 0 and then fix the Partitioned Area 0 with a Gre tunnel between
R3 and R2 and then put R1 in a Totally Stubby Area, I think this would
work. Thoughts?
Stefan Grey wrote:
> Hello group,
>
> Is it possible to send the default route to just one router???
> Say I have this topology. Between R1 R2 and R3 is ospf. all routes to
> this domain are coming from R3 router. Between R1 and R4 is ISDN and
> from R1 to R4 is the default route with the AD of 200. I need to do so
> that when the link between R1 and R3 is down alltraffic is going out
> to R4. From R1 it will go since there is a static default route to R4.
> How could I advertise the default route to R2 from R1??? could anybody
> suggest something??
>
> R3-R1 -R2
> |
> R4
>
> Sure better if R3 would not see this default.
>
> Thanks,
>
> _________________________________________________________________
> Rain or shine, sleet or snow? Visit MSN Weather today!
> http://www.msn.ie/weather
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Victor Cappuccio cvictor@protokolgroup.com .O. ..O OOO
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:52 GMT-3