From: manoj menon (manojmenon123@yahoo.com)
Date: Sat Oct 22 2005 - 03:20:24 GMT-3
Hello Group,
We recently upgraded one of our links to certain bandwidth from a lower bandwidth. I normally check the 'controllers' to see the the clock rate received is in sync what we 'pay for'. But these days, increasingly, many routers don't show up the clock rate received...not sure may be its showing and I am looking at the wrong place.. Since we have a group of experienced people around here....can some one help me...thanks in advance. I
have 'show version' down for your reference..just in case.... Its a Cisco 2651XM router with 12.2.19a cod version on it
sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IK9S-M), Version 12.2(19a), RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Tue 30-Sep-03 03:30 by pwade
Image text-base: 0x8000808C, data-base: 0x81285B9C
ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)
rpkj102-wan02-2651 uptime is 21 weeks, 11 hours, 55 minutes
System returned to ROM by power-on
System restarted at 18:31:46 GMT Tue May 24 2005
System image file is "flash:c2600-ik9s-mz.122-19a.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco 2651XM (MPC860P) processor (revision 0x301) with 125952K/5120K bytes of memory.
Processor board ID xxxxxxxxxxx
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
sh controllers serial 0/0
Interface Serial0/0
Hardware is PowerQUICC MPC860
DTE V.35 TX and RX clocks detected.
idb at 0x81F62A44, driver data structure at 0x81F6AD40
SCC Registers:
General [GSMR]=0x2:0x00000030, Protocol-specific [PSMR]=0x8
Events [SCCE]=0x0000, Mask [SCCM]=0x001F, Status [SCCS]=0x06
Transmit on Demand [TODR]=0x0, Data Sync [DSR]=0x7E7E
Interrupt Registers:
Config [CICR]=0x00367F80, Pending [CIPR]=0x04008000
Mask [CIMR]=0x48204002, In-srv [CISR]=0x00000000
Command register [CR]=0x600
Port A [PADIR]=0x1000, [PAPAR]=0xFFFF
[PAODR]=0x0000, [PADAT]=0xEFFF
Port B [PBDIR]=0x09C0F, [PBPAR]=0x0800E
[PBODR]=0x0000E, [PBDAT]=0x3E37D
Port C [PCDIR]=0x00C, [PCPAR]=0x000
[PCSO]=0xC20, [PCDAT]=0xFC0, [PCINT]=0x00F
Receive Ring
rmd(68012830): status 9000 length 72 address 7CC0124
rmd(68012838): status 9000 length B2 address 7CB9FA4
rmd(68012840): status 9000 length B2 address 7CBE0A4
rmd(68012848): status 9000 length 72 address 7CBACA4
rmd(68012850): status 9000 length 72 address 7CB5EA4
rmd(68012858): status 9000 length 152 address 7CC0E24
rmd(68012860): status 9000 length 92 address 7CB5824
rmd(68012868): status 9000 length 9A address 7CBE724
rmd(68012870): status 9000 length 19A address 7CBDA24
rmd(68012878): status 9000 length 72 address 7CB92A4
rmd(68012880): status 9000 length E2 address 7CC14A4
rmd(68012888): status 9000 length B2 address 7CBF424
rmd(68012890): status 9000 length 10A address 7CB85A4
rmd(68012898): status 9000 length CA address 7CBC6A4
rmd(680128A0): status 9000 length 72 address 7CBEDA4
rmd(680128A8): status B000 length 72 address 7CC1B24
Transmit Ring
tmd(680128B0): status 5C00 length A0 address 7B02698
tmd(680128B8): status 5C00 length A0 address 7CD1B38
tmd(680128C0): status 5C00 length C8 address 7B02358
tmd(680128C8): status 5C00 length 148 address 7B036D8
tmd(680128D0): status 5C00 length 3C0 address 7CD9918
tmd(680128D8): status 5C00 length 70 address 7CD1178
tmd(680128E0): status 5C00 length 78 address 7CD1B38
tmd(680128E8): status 5C00 length A0 address 7B04D98
tmd(680128F0): status 5C00 length A0 address 7B04D98
tmd(680128F8): status 5C00 length 70 address 7B04A58
tmd(68012900): status 5C00 length 57 address 7C6574A
tmd(68012908): status 5C00 length 5E0 address 7CEFB58
tmd(68012910): status 5C00 length 208 address 7CD6FD8
tmd(68012918): status DC00 length 5E0 address 7CE79D8
tmd(68012920): status DC00 length 80 address 7CD14B8
tmd(68012928): status 7C00 length 5E0 address 7CEC3D8
tx_limited=1(2)
SCC GENERAL PARAMETER RAM (at 0x68013C00)
Rx BD Base [RBASE]=0x2830, Fn Code [RFCR]=0x18
Tx BD Base [TBASE]=0x28B0, Fn Code [TFCR]=0x18
Max Rx Buff Len [MRBLR]=1548
Rx State [RSTATE]=0x18008440, BD Ptr [RBPTR]=0x2848
Tx State [TSTATE]=0x18800511, BD Ptr [TBPTR]=0x2918
SCC HDLC PARAMETER RAM (at 0x68013C38)
CRC Preset [C_PRES]=0xFFFF, Mask [C_MASK]=0xF0B8
Errors: CRC [CRCEC]=0, Aborts [ABTSC]=0, Discards [DISFC]=0
Nonmatch Addr Cntr [NMARC]=0
Retry Count [RETRC]=0
Max Frame Length [MFLR]=1608
Rx Int Threshold [RFTHR]=0, Frame Cnt [RFCNT]=32221
User-defined Address 0000/0000/0000/0000
User-defined Address Mask 0x0000
buffer size 1524
PowerQUICC SCC specific errors:
16088584 input aborts on receiving flag sequence
0 throttles, 0 enables
0 overruns
0 transmitter underruns
0 transmitter CTS losts
116165938 aborted short frames
---------------------------------
Yahoo! FareChase - Search multiple travel sites in one click.
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:52 GMT-3