From: Hough, Earl (Earl.Hough@sarcom.com)
Date: Thu Oct 20 2005 - 14:48:05 GMT-3
That image is running c2600-j1s3 is Enterprise Basic, which does not
have support for OSPFv3. If you have a 2620, you can upgrade the DRAM
from 32 to 64 and you should be able to get the full IP Plus 12.2.15.T17
image to work on it. Unfortunately, with the older 2610 and 2611
(non-XM) you are limited to 32Mb DRAM.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
DP
Sent: Thursday, October 20, 2005 1:28 PM
To: Ashok Ananda (aananda)
Cc: Cisco certification
Subject: Re: ipv6 support!
A little off-topic but what rev of code is everyone using for 2600's? My
2500's can run OSPFv3 however my 2600/'s with
c2600-j1s3-mz.122-15.t17.binjust get returned to the config prompt.
Anyone else having this issue?
DP
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:51 GMT-3