From: Stefan Grey (examplebrain@hotmail.com)
Date: Thu Oct 20 2005 - 11:34:48 GMT-3
Is it possible to set it less than maximum frame size of my media??? When I
typed
ip mtu 1000 on my ethernet interface it also doesnt let me to configure bc
value to 1000 bytes or 8000kbps.
Is it possible to somhow in other way change the maximum frame size of the
media??
> > R6(config-if)#rate-limit input 256000 ?
> > <1000-512000000> Normal burst bytes
The CLI shows that at certain situations it could be set to 1000 or not??
>
>Dear Stefan Grey,
>
>Because the minimal burst size is of course the maximum frame size of your
>media.
>
> > -----Urspr|ngliche Nachricht-----
> > Von: nobody@groupstudy.com [mailto:nobody@groupstudy.com] Im Auftrag
> > von Stefan Grey
> > Gesendet: Mittwoch, 12. Oktober 2005 15:34
> > An: ccielab@groupstudy.com
> > Betreff: Rate-limit
> >
> > Hello,
> > Look what happens when I wnat to configure rate-limit on input with
> > 8000kbts
> > of normal burst
> > It is 1000 of bytes and Cli shows that this is acceptable value.
> > R6(config-if)#rate-limit input 256000 ?
> > <1000-512000000> Normal burst bytes
> >
> > R6(config-if)#rate-limit input 256000 1000 ?
> > <2000-1024000000> Maximum burst bytes
> >
> > R6(config-if)#rate-limit input 256000 1000 2000 ?
> > conform-action action when rate not exceeded
> >
> >
> >
> >
> > R6(config-if)#$00 1000 2000 conform-action transmit exceed-action
> > drop
> > Illegal normal burst size
> > Increasing normal burst size to 1500
> >
> > So why is this than illigal normal burst size and why the router
> > automatically increases it to 1500 value?? For me such begaviour is
> > new.
> >
> >
> >
> > Thanks.
> >
> > _________________________________________________________________
> > Easily locate documents, email & more on your PC - get MSN Toolbar!
> > http://toolbar.msn.ie
> >
> > ____________________________________________________________________
> > ___
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>Diese Information ist vertraulich und ausschlie_lich zur Kenntnisnahme
>durch den (die) genannten Adressaten bestimmt.
>Wenn Sie nicht der vorgesehene Adressat sind, informieren sie uns bitte
>unverz|glich.
>The information herein is confidential and intended solely for the
>attention and use of the named addressee(s).
>If you are not the intended recipient please inform us immediately.
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:51 GMT-3