From: Chris Lewis (chrlewiscsco@yahoo.com)
Date: Tue Oct 18 2005 - 22:19:32 GMT-3
By default 75% is available for reservation by classes, it does not matter what those classes are called. You can allocate however much of the 75% you want to the class default, as long as the total amount you allocate to class default and other classes does not exceed 75%
Chris
Daniel Berlinski <Daniel.Berlinski@telecom.co.nz> wrote:
Hi there
I've got a question regarding Class-Based WFQ
I'm wondering the following scenario:
By default 75% of the available bandwidth of an interface can be
assigned to CBWFQ + LLQ classes.
In this case, is this 75% available to all classes (including
class-default) or is it available to only the
"non-class-default-queues"?
Best regards
DB
"This communication, including any attachments, is confidential.
If you are not the intended recipient, you should not read
it - please contact me immediately, destroy it, and do not
copy or use any part of this communication or disclose
anything about it. Thank you. Please note that this
communication does not designate an information system for
the purposes of the Electronic Transactions Act 2002."
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:51 GMT-3