CBWFQ> Bandwidth available to "class-default"

From: Daniel Berlinski (Daniel.Berlinski@telecom.co.nz)
Date: Tue Oct 18 2005 - 17:07:46 GMT-3

• Next message: Javier Tomé: "Re: Simple DHCP server question"
• Previous message: simon hart: "3550 port control Dot1x"
• Next in thread: Chris Lewis: "Re: CBWFQ> Bandwidth available to "class-default""
• Maybe reply: Chris Lewis: "Re: CBWFQ> Bandwidth available to "class-default""
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi there

I've got a question regarding Class-Based WFQ

I'm wondering the following scenario:

By default 75% of the available bandwidth of an interface can be
assigned to CBWFQ + LLQ classes.

In this case, is this 75% available to all classes (including
class-default) or is it available to only the

"non-class-default-queues"?

Best regards

DB

"This communication, including any attachments, is confidential.
If you are not the intended recipient, you should not read
it - please contact me immediately, destroy it, and do not
copy or use any part of this communication or disclose
anything about it. Thank you. Please note that this
communication does not designate an information system for
 the purposes of the Electronic Transactions Act 2002."

• Next message: Javier Tomé: "Re: Simple DHCP server question"
• Previous message: simon hart: "3550 port control Dot1x"
• Next in thread: Chris Lewis: "Re: CBWFQ> Bandwidth available to "class-default""
• Maybe reply: Chris Lewis: "Re: CBWFQ> Bandwidth available to "class-default""
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:51 GMT-3