Fallback bridging across trunk interface on two switches.

From: Primetek_Easyman (easyman@primetek.com.tw)
Date: Mon Oct 17 2005 - 02:32:37 GMT-3

• Next message: 3x CCIE: "max-metric router-lsa on-startup wait-for-bgp"
• Previous message: CCIEing: "Which encapsulation should be used for PPPOA?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi, Groups

I have a question about fallback bridging.
I know how it works and it need to be configured on SVI or L3 routed intf.

This scenario is referred to ipexpert wb 7.0 lab 36.

Given two switches connect together by dot1q trunk interface.
vlan999-------(switch1)=============(switch2)--------vlan1000
                      dot1q trunk
switch1 is vtp server , switch2 is vtp client.
If we want fallback bridge on vlan999 & vlan1000.
Should we create svi999 & svi1000 on only switch1 and put the "bridge group
1" command?

Or create two svi with "bridge group 1" command on both switches.
CCO Doc example only use one switch.

TIA.
Easyman

• Next message: 3x CCIE: "max-metric router-lsa on-startup wait-for-bgp"
• Previous message: CCIEing: "Which encapsulation should be used for PPPOA?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:51 GMT-3