From: Shanky (shankyz@gmail.com)
Date: Thu Oct 13 2005 - 10:59:57 GMT-3
its under Cisco IOS Security Command Reference, Release
12.4<http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hs
ec_r/index.htm>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hsec_r/
sec_p1h.htm#wp1138118
For 12.3
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/secur
_r/sec_p1g.htm#wp1069563
On 10/13/05, Dennis J. Hartmann <dennisjhartmann@hotmail.com> wrote:
>
> Does anyone know which 12.3 Command Reference all of the ppp
> authentication commands are?
>
> I would think that it woud be in the Dial or WAN command reference, but
> I've checked both and it's not in there......
>
> If someone knows another IOS code train in which I can find this
> reference, that would be fine as well.
>
> I've noticed that different code trains have different documentation
> trends. An example of this is the 12.0 documentation command rerence for
> IP
> routing protocols. 12.0 used to break down the command reference down by
> routing protocol. This is very helpful when you're looking for a "mature"
> NERD KNOB and don't have the time to filter the entire 12.2 or 12.3 IP
> Routing Protocol command reference.
>
>
> Sincerely,
>
> Dennis J. Hartmann
>
> White Pine Communications
>
> dh8@pobox.com
>
> CCSI#23402 / CCVP / CCIP / CCNP
>
> Cisco Optical, VPN & IDS Specialist
>
> MCSE
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:50 GMT-3