From: Christopher M. Heffner (cheffner@certified-labs.com)
Date: Sat Oct 15 2005 - 00:54:20 GMT-3
Dennis,
The command is referenced in the Cisco IOS Security Command Reference
book.
Here is the direct link to the documentation for the command.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/
secur_r/sec_p1g.htm#wp1069563
Have fun and keep studying buddy.
Later.
Christopher M. Heffner, CCIE 8211, CCSI 98760
Strategic Network Solutions, Inc.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Dennis J. Hartmann
Sent: Thursday, October 13, 2005 9:46 AM
To: ccielab@groupstudy.com
Subject: ppp authentication chap->Command Reference
Does anyone know which 12.3 Command Reference all of the ppp
authentication commands are?
I would think that it woud be in the Dial or WAN command reference,
but I've checked both and it's not in there......
If someone knows another IOS code train in which I can find this
reference, that would be fine as well.
I've noticed that different code trains have different documentation
trends. An example of this is the 12.0 documentation command rerence
for IP routing protocols. 12.0 used to break down the command reference
down by routing protocol. This is very helpful when you're looking for
a "mature"
NERD KNOB and don't have the time to filter the entire 12.2 or 12.3 IP
Routing Protocol command reference.
Sincerely,
Dennis J. Hartmann
White Pine Communications
CCSI#23402 / CCVP / CCIP / CCNP
Cisco Optical, VPN & IDS Specialist
MCSE
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:51 GMT-3