From: manoj menon (manojmenon123@yahoo.com)
Date: Thu Oct 13 2005 - 02:25:52 GMT-3
On R1#
no ip routing
!
ip default-gateway <R2-E0-IP_ADD>
!
Either you can advertise the R1-R2 Ethernet subnet in OSPF, or redistribute, or static route back to R1, and redistribute static into OSPF...
Comments...
Regards,
Mnaoj
Victor Cappuccio <cvictor@protokolgroup.com> wrote:
Hello People, consider this Scenario
10.1.1.0/24
R1 --- Ethernet --- R2 | Network Cloud Running OSPF | R3.
---Vlan 50 ----
You are not allowed to configure any routing protocol on R1, but one of
the requirements is that R1 should be able to ping any ip address in R3,
how would you accomplish this? I thought to create a secondary address
in R1 with an IP Classful Address Mask (10.0.0.1/8) and complete the ARP
Table for R3 physical interfaces with R2 Ethernet Mac Address (since R2
knows the complete network).- I Think this could work Ok / Have not
tested yet .. Can you see another was of accomplishing this task?
Regards
Victor.
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:50 GMT-3