From: Ed Lui (edwlui@gmail.com)
Date: Thu Oct 13 2005 - 02:15:42 GMT-3
Configure NAT on R2
On 10/12/05, Victor Cappuccio <cvictor@protokolgroup.com> wrote:
> Hello People, consider this Scenario
>
> 10.1.1.0/24
> R1 --- Ethernet --- R2 | Network Cloud Running OSPF | R3.
> ---Vlan 50 ----
>
> You are not allowed to configure any routing protocol on R1, but one of
> the requirements is that R1 should be able to ping any ip address in R3,
> how would you accomplish this? I thought to create a secondary address
> in R1 with an IP Classful Address Mask (10.0.0.1/8) and complete the ARP
> Table for R3 physical interfaces with R2 Ethernet Mac Address (since R2
> knows the complete network).- I Think this could work Ok / Have not
> tested yet .. Can you see another was of accomplishing this task?
>
>
> Regards
> Victor.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:50 GMT-3