From: Leigh Harrison (ccileigh@gmail.com)
Date: Wed Oct 12 2005 - 07:48:42 GMT-3
Hey there Stefan,
It's the link-local address that you need to map - so that you can get
your L3 - L2 resolution. If you have routing on the box and do a "sh
ipv6 route" the next hop is the link local address, so that's the fella
to map.
LH
Stefan Grey wrote:
> Hello,
> Question:
>
> When generally configuring IPv6 over frame relay should we just map
> the global unicast address of the remote side to the dlci. (Which is
> configured using ipv6add/64 command)
> frame-relay map ipv6 2080:1:1:42::2 102 broadcast
>
> Or also in addition the link-local address as well??
> frame-relay map ipv6 FE80::2D0:58FF:FE72:FAE0 102 broadcast
>
> 2. If the link local address is not necessary mapped than in which
> situation could it be nececcasy to map also or only the link-local
> ipv6 address.
>
> Thanks a lot,
>
> _________________________________________________________________
> Chat via voice, text or video - get MSN Messenger FREE!
> http://messenger.msn.co.uk
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:50 GMT-3